KMC MAX 300Fw

Forestry wildfire

Purpose-Built Wildfire Platform

Built for Active Wildfire Response

The KMC MAX 300FW is an extreme-traction wildfire platform engineered to operate where conventional equipment cannot. It combines steep-terrain capability, low ground pressure, purposeful water delivery, and a modular chassis built to remain valuable long after fire season ends.

10,000 L

Water Tank

Full 2,640-gallon onboard capacity for long missions and sustained wildfire operations.

600 GPM

Water Delivery

Four selectable output levels provide flexibility for changing fireground conditions.

60%

Front Slope

Proven steep-terrain capability under optimal conditions for confident access.

20 Min.

Platform Change

Remove the water tank and prepare the rear platform for another mission in about 20 minutes.

The Fawcett Cannon + Water System

Purposeful Water Delivery

The wildfire system is designed to give crews reach, coverage, and operational flexibility from inside the cab while also supporting ground crews and mop-up operations.

Wildfire System Capabilities

  • Up to 10 minutes of continuous firefighting
  • Up to 600 GPM with four selectable output levels
  • 340-degree turret rotation
  • Adjustable spray reach from 20 ft to 270 ft (6 m to 80 m)
  • Wide fan mist or hard jet stream
  • Additional water outlets for ground crews and mop-up
  • Refill time as low as eight minutes
  • 200 ft of 3/4 in braided hose on a live reel
  • Backup motor and plumbing redundancy

Operator Environment

  • Cannon-mounted and perimeter cameras protected from debris
  • Spacious cab with wraparound windows and intuitive controls
  • Full perimeter white and amber lighting for 24/7 operations
  • High-pressure windshield washer for ash and visibility
  • MES air-conditioning filters with easy daily access
  • Cabin heat for off-season work
  • Storm King Mountain fire curtains rated for direct flame contact up to 1,100°C for up to five minutes under specified conditions
  • ROPS-minded safety, ergonomics, operational efficiency, and survivability

Cabin Confidence

Designed Around the Operator

Visibility, climate control, lighting, filtration, and protective systems are integrated to support crews working long hours in smoke, ash, darkness, and difficult terrain.

Front Attachment Capability

Use the Platform. Choose the Tool.

Front hydraulics provide approximately 6,500 PSI and 94 GPM (355 LPM), giving the machine the power to run a wide range of market attachments. The platform is available with Global Euro Mount or Skid Steer Mount configurations.

Drum Mulcher
Six-Way Blade
Feller Buncher
Vegetation Management Tools
Firebreak Maintenance Tools

Rear Roll-On / Roll-Off System

One Platform. Multiple Missions.

The 10,000 L water tank can be removed and replaced in about 20 minutes using the built-in roll-on/roll-off system. Once removed, the chassis provides approximately 15 ft by 8 ft of clear rear platform area for other modules.

15 ft Clear Platform Length
8 ft Clear Platform Width
5 PSI Base Machine Ground Pressure
9 PSI With Full Water Tank
Personnel Carrier
Skidder / Clam Bunk
Debris Dumpster
EMS / Rescue Module
Utility Cargo Platform

Built for Wildfire Season and Valuable All Year

Year-Round Return on Investment

Wildfire Response

Rapid deployment and water delivery when every minute counts.

Fireline Dozing

Push line, build line, and hold line in extreme conditions.

Pre-Season Vegetation Management

Reduce fuel loads and create defensible space ahead of fire season.

Firebreak Creation

Open and maintain firebreaks across difficult terrain.

Debris Handling

Move, haul, and clear debris with power and control.

Difficult-Access Support

Reach steep slopes, mud, rocks, and remote worksites where other equipment cannot.

Emergency Response

Transport crews, water, and gear to support a wide range of incidents.

Wildfire First. Built for What Comes After, Too.

The KMC MAX 300FW combines wildfire capability with a modular platform designed to keep working across seasons, industries, and changing mission requirements.

KMC MAX 300FW

Technical Specifications

Purpose-built performance for wildfire response, fireline construction, water support, and year-round multi-platform operations.

335 hp Engine Gross Power
61,730 lb Operating Weight
9 psi Ground Pressure
10,000 L Water Tank Capacity

Powertrain

EngineVolvo Penta TAD 884VE
Engine Gross Power335 hp (250 kW)
Engine EmissionU.S. EPA Tier 4 Final
Travel PumpsHPV 135 cc LINDE
Travel Motors2 × MS35 Poclain, 6527 psi
Attachment Pump2 × HPR 135 LINDE, 6091 psi

Performance

Track21.75 in wide rubber-bushed pads linked together for high speed
Lower Rollers6 road wheels
Voltage24 volt
Maximum Forward Speed9 mph (15 km/h)
Maximum Reverse Speed9 mph (15 km/h)
Operating Weight61,730 lb (28 ton)
Ground Pressure9 psi

Fluid Capacities

Hydraulic Oil Tank105 gal (400 L)
Fuel Tank80 gal (300 L)
DEF AdBlue® Tank10 gal (40 L)

Dimensions

Width102 in (2591 mm)
Overall Height122.0 in (3100 mm)
Overall Length248.0 in (6300 mm)
Height from Ground to Top of Tank102.4 in (2600 mm)
Rear Chassis Free Length Behind Cab173.2 in (4400 mm)

Standard Equipment

  • Volvo Penta TAD 884VE engine
  • Hydrostatic transmission
  • Hydrostatic attachments
  • Aluminum cooler
  • ROPS / FOPS / OPS / Chain Saw-certified cabin
  • Comfort driver's seat, air suspended
  • Ergonomic joysticks
  • Heating and air conditioning system
  • 30 mm Lexan cabin windshields
  • Cabin dust filtration
  • LED working lights
  • Air compressor system

Attachment

Water Tank10,000 L
Fire Extinguishing System Pump113 L/min
View Hydraulic Pump Parameters

Linde HPV 135 Closed Circuit

Maximum Displacement8.27 cu in/rev (135.5 cm³/rev)
Operating Speed3000 rpm
Maximum Speed3200 rpm
Nominal Pressure6100 psi (420 bar)
Maximum Pressure7250 psi (500 bar)
Maximum Volumetric Flow96.7 GPM (366 L/min)
Maximum Input Torque685 lb-ft (929 N·m)
Maximum Power391 hp (292 kW)
Approximate Dry Weight158.7 lb (72 kg)

Linde HPR 135 Open Circuit

Maximum Displacement8.28 cu in/rev (135.7 cm³/rev)
Operating Speed2300 rpm
Maximum Speed2350 rpm
Nominal Pressure6100 psi (420 bar)
Maximum Pressure7250 psi (500 bar)
Maximum Volumetric Flow82.4 GPM (312 L/min)
Maximum Input Torque669 lb-ft (907 N·m)
Maximum Power293.0 hp (218.5 kW)
Approximate Dry Weight143.3 lb (65 kg)

Dimensions shown without attachment unless otherwise noted.